Cel-Fi GO Telstra Mobile Repeater Booster - Building Omni pack

(Including tax)
Do you currently have a Telstra Mobile Network compatible Mobile Phone or Modem?
Is Telstra Mobile Network coverage available at your intended travel location via a handheld or external antenna according to Telstra coverage maps?
Are you aware the GO will offer in-building coverage of upto 30m x 30m (900 sq m)? This may vary depending on building structure or be less if used in a vehicle.
Does your Mobile/Modem functional on the Telstra network at a location known to have good Telstra signal strength.
For Mobile GO, the address at which the GO will most often be located.
The Telco requires that businesses provide an ABN / ACN and Individuals a Drivers Licence or Passport No. for identification purposes.
Wall mounted 3G 4G coverage antenna Ceiling mounted 3G 4G coverage antenna
see variations

Cel-Fi GO Repeater is the ONLY Mobile Booster that is LEGAL for use in Australia and APPROVED for use by Mobile Network Operators

The Cel-Fi GO for Telstra will boost voice and mobile internet for multiple mobile devices. It is not just an amplifier, but a Smart Repeater which dynamically adjusts its gain and connection status to provide optimum mobile signal quality. Suitable for distribution of 3G/4G mobile signal within Commercial buildings etc.
As the signal available from the mobile network drops, the Cel-Fi repeater increase its boost level by up to 100dB drastically reducing dropped calls and slow data in mobile black spots.

  • Designed for fixed building installations.
  • Up to 100dB of dynamic system gain.
  • Base-station style Omni-directional outdoor antenna for mobile network connection
  • Choice of Wall or Ceiling mounted antenna for indoor coverage.
  • Locked to Telstra's Mobile Network.
  • Carrier approved and legal for use in Australia.
  • Band Selection Button - Note that the GO will connect via only one band at a time.
  • Bluetooth WAVE App for iPhone, Android & Computers

Cel-fi Go repeater booster for stationary instalations


Important Notes
Cel-Fi GO will boost a single band at a time. That is it will connect via 3G 850, 4G 700 or 4G 1800. It will not boost 3G and 4G at the same time. Unless you specifically require 4G, it is highly recommended to leave the GO in 3G mode to ensure voice calls are received. Voice over 4G (VoLTE or Vo4G) will only work in selected areas and with later model phones.

Choice of broomstick style fiberglass bar mounted antenna (Network antenna) option. selectable above

money-back-guarantee30 Day Money Back Guarantee*
If you are not 100% happy with the performance of this product it can be returned within 30 days after purchasing for a full refund minus any shipping charges.

Cel-Fi is covered by a 24 month warranty.

Want to learn more about the legal situation of Repeaters and Boosters in Australia, visit www.mobilephonebooster.com.au for further information.

® is a registered trade mark of Telstra Corporation Limited. ABN 33 051 775 556

*Note that this guaranty assumes that there is actually signal abvailable to your location.

Service Carrier :
  • Telstra - Aldi Mobile, Boost Mobile, Woolworths Mobile
Compatible Services (Band):
  • 3G 850MHz (B5)
  • 4G 700MHz (B28)
  • 4G 1800MHz (B3)
Antenna Mount:
  • Pole
Antenna Type:
  • Directional
Polarization :
  • Vertical

Cel-Fi GO Stationary - Quick Start Guide (qsg_GO-stationary_v12_420N007-G31-001-00RA.pdf, 728 Kb) [Download]

Cel-Fi GO Stationary - Brochure (CelFi-GO-Telstra-Stationary-Brocure.pdf, 541 Kb) [Download]

Antenna Specs (Blackhawk-4-6dBi-Compact-vehicle-antenna.pdf, 359 Kb) [Download]

Mobile Repeater Pack includes:

  • Cel-Fi GO Stationary Model
  • Omni directional outdoor antenna
    - 6dBi 698-2700MHz
    - 10m LMR240 cable
  • Choice of Ceiling-mount Omnidirectional or Wall-mount Panel type Coverage Antenna
    - 5dBi 698-2170MHz 65°
    - 10m LMR240 cable
  • 240V Power pack

UMTS/3G 850 - Band 5
Uplink: 824 - 849 MHz, Downlink: 869 - 894 MHz
4G 700/1800 - Band 28 & 3
Uplink: 703 – 733 MHz, Downlink: 758 – 788 MHz
Uplink: 1710 – 1785 MHz, Downlink: 1805 – 1880 MHz
(Will boost only one band at a time)




Up to 100dB system gain (Go Stationary)
Up to 70dB system gain (Go Mobile)


Will only boost between these signal levels:
3G: -80dBm and -104dBm
4G: -95dBm and -119dBm


Button for band selection:
3G: 850
4G: 700 or 1800 (strongest signal)
AUTO: 850, 700 or 1800 (strongest signal)


H: 28mm
W: 87mm
L: 255mm
Weight: 600g

Operating Temperature: 0° to 65°C
Storage Temperature: -25° to 65°C
Relative Humidity: 0 to 95% noncondensing
12 VDC via external supply (2 included)
External Supply: 100-240 VAC, 47-63Hz
Power Consumption: <15W per unit
External Antenna Ports: Donor and Service SMA Female
Programming Ports: Mini-USB
Bluetooth Low Energy
24 months

CE Mark


Setup Instructions

Install your booster – follow the instructions in the separate Quick Start Guide which was included in the box. Quick Start Guides can be downloaded from the individual Product pages. Wait for the system to start up and complete the network selection. This can take between 5 to 7 minutes. When this process is complete, some devices will display an error message indicating that registration is required.

If you have an Apple or Android device



Go to the App Store or the Google Play Store and search for “CEL-FI WAVE” to download our free app. The app connects to your Cel-Fi device via Bluetooth (Requires Bluetooth 4.1 and Android 4.3 or newer).
Note: that your device will need internet access to use the Wave app. If the cel-fi is not connecting to the service, your device will need internet access via its own WiFi or Mobile Broadband.

App Store       Play Store


Launch the WAVE app in close proximity to the Coverage Unit. The WAVE app will automatically connect to the Cel-Fi CU.

USB Connection - Prefered Method

Note: Your PC will need internet access to use the Wave app as it is a cloud application. Either via the Cel-Fi or the PC's own WiFi / Broadband connection.



Download Cel-Fi WAVE App:

Windows       OSX


Attach a micro USB cable from your computer to the Cel-Fi Coverage Unit and launch the WAVE computer application.


Get More from Cel-Fi WAVE

Cel-Fi WAVE is an application available on both smartphones and desktop computers that allows users to interact with Cel-Fi, to access advanced and supplementary features.


Glance-able view to the state of your Cel-Fi environment.


Change the default Operator, select external antenna per band, name your booster, and more.

Advanced Mode:

Get a real-time technical overview of the installation of your Cel-Fi Booster.

Booster Updates:

Keep your Cel-Fi Booster up-to-date as new software versions become available.

Related Products