Warning Cookies are used on this site to provide the best user experience. If you continue, we assume that you agree to receive cookies from this site. OK

Cel-Fi GO Telstra Mobile Repeater Booster - Caravan Directional Pack

AU$1,105.50
(Including tax)
For Mobile GO, the address at which the GO will most often be located.
RPR-CF-00117
In stock
+

Cel-Fi GO Repeater is the ONLY Mobile Booster that is LEGAL for use in Australia and APPROVED for use by Mobile Network Operators

The Cel-Fi GO for Telstra will boost voice and mobile internet for multiple mobile devices. It is not just an amplifier, but a Smart Repeater which dynamically adjusts its gain and connection status to provide optimum mobile signal quality. Suitable for distribution of 3G/4G mobile signal within Caravans, Mobile-homes etc.
As the signal available from the mobile network drops, the Cel-Fi repeater increase its boost level by up to 100dB drastically reducing dropped calls and slow data in mobile black spots.

  • Designed for vehicles and moving transport applications.
  • Up to 100dB of dynamic system gain.
  • Internal Wall-mount coverage antenna.
  • All-Band external antenna included.
  • Locked to Telstra's Mobile Network.
  • Carrier approved and legal for use in Australia.
  • Band Selection Button - Note that the GO will connect via only one band at a time.
  • Bluetooth WAVE App for iPhone, Android & Computers

Important Notes
Cel-Fi GO will boost a single band at a time. That is it will connect via 3G 850, 4G 700 or 4G 1800. It will not boost 3G and 4G at the same time. Unless you specifically require 4G, it is highly recommended to leave the GO in 3G mode to ensure voice calls are received. Voice over 4G (VoLTE or Vo4G) will only work in selected areas and with later model phones.
 

Choice of broomstick style fiberglass bar mounted antenna (Network antenna) option. selectable above

money-back-guarantee30 Day Money Back Guarantee*
If you are not 100% happy with the performance of this product it can be returned within 30 days after purchasing for a full refund minus any shipping charges.

Cel-Fi is covered by a 24 month warranty.

Want to learn more about the legal situation of Repeaters and Boosters in Australia, visit www.mobilephonebooster.com.au for further information.

® is a registered trade mark of Telstra Corporation Limited. ABN 33 051 775 556

Service Carrier :
  • Telstra - Aldi Mobile, Boost Mobile, Woolworths Mobile
Compatible Services (Band):
  • 3G 850MHz (B5)
  • 4G 700MHz (B28)
  • 4G 1800MHz (B3)
Antenna Mount:
  • Pole
Antenna Type:
  • Directional
Polarization :
  • Vertical

Cel-Fi GO Stationary - Quick Start Guide (qsg_GO-stationary_v12_420N007-G31-001-00RA.pdf, 728 Kb) [Download]

Cel-Fi GO Stationary - Brochure (CelFi-GO-Telstra-Stationary-Brocure.pdf, 541 Kb) [Download]

Antenna Specs (Blackhawk-4-6dBi-Compact-vehicle-antenna.pdf, 359 Kb) [Download]

Mobile Repeater Pack includes:

  • Cel-Fi GO Stationary Model
  • LPDA Outdoor Directional Antenna:
    - 10dBi 700/850/900 - 11dBi 1800/2100/2700
    - 10m LMR240 cable
  • Indoor Wall Mount Coverage Antenna with 6m RG58 cable
  • 240V Power pack
FREQUENCY

UMTS/3G 850 - Band 5
Uplink: 824 - 849 MHz, Downlink: 869 - 894 MHz
4G 700/1800 - Band 28 & 3
Uplink: 703 – 733 MHz, Downlink: 758 – 788 MHz
Uplink: 1710 – 1785 MHz, Downlink: 1805 – 1880 MHz
(Will boost only one band at a time)

DATA

UMTS / HSPA / HSPA+/ 4G LTE (FDD)

GAIN

Up to 100dB system gain (Go Stationary)
Up to 70dB system gain (Go Mobile)

BOOSTING THRESHOLD

Will only boost between these signal levels:
3G: -80dBm and -104dBm
4G: -95dBm and -119dBm

BAND SELECTION

Button for band selection:
3G: 850
4G: 700 or 1800 (strongest signal)
AUTO: 850, 700 or 1800 (strongest signal)

NETWORK UNIT

H: 28mm
W: 87mm
L: 255mm
Weight: 600g

ENVIRONMENT
Operating Temperature: 0° to 65°C
Storage Temperature: -25° to 65°C
Relative Humidity: 0 to 95% noncondensing
POWER
12 VDC via external supply (2 included)
External Supply: 100-240 VAC, 47-63Hz
Power Consumption: <15W per unit
INTERFACES
External Antenna Ports: Donor and Service SMA Female
Programming Ports: Mini-USB
Bluetooth Low Energy
WARRANTY
24 months
CERTIFICATIONS

CE Mark
C-TICK
FCC
RCM

Wave

Setup Instructions

Install your booster – follow the instructions in the separate Quick Start Guide which was included in the box. Quick Start Guides can be downloaded from the individual Product pages. Wait for the system to start up and complete the network selection. This can take between 5 to 7 minutes. When this process is complete, some devices will display an error message indicating that registration is required.

If you have an Apple or Android device

wave-phone-app

STEP 1

Go to the App Store or the Google Play Store and search for “CEL-FI WAVE” to download our free app. The app connects to your Cel-Fi device via Bluetooth (Requires Bluetooth 4.1 and Android 4.3 or newer).
Note: that your device will need internet access to use the Wave app. If the cel-fi is not connecting to the service, your device will need internet access via its own WiFi or Mobile Broadband.

App Store       Play Store

STEP 2

Launch the WAVE app in close proximity to the Coverage Unit. The WAVE app will automatically connect to the Cel-Fi CU.

USB Connection - Prefered Method

Note: Your PC will need internet access to use the Wave app as it is a cloud application. Either via the Cel-Fi or the PC's own WiFi / Broadband connection.

wave-computer-software

STEP 1

Download Cel-Fi WAVE App:

Windows       OSX

STEP 2

Attach a micro USB cable from your computer to the Cel-Fi Coverage Unit and launch the WAVE computer application.

wave-dash-pro

Get More from Cel-Fi WAVE

Cel-Fi WAVE is an application available on both smartphones and desktop computers that allows users to interact with Cel-Fi, to access advanced and supplementary features.

Dashboard:

Glance-able view to the state of your Cel-Fi environment.

Settings:

Change the default Operator, select external antenna per band, name your booster, and more.

Advanced Mode:

Get a real-time technical overview of the installation of your Cel-Fi Booster.

Booster Updates:

Keep your Cel-Fi Booster up-to-date as new software versions become available.

Related Products

remoteone.com.au